Loading... Please wait... 
Categories
Categories
Brands
Brands
ISR Radial Mount Front Brake 6 Piston CNC Billet Monobloc Calipers for Yamaha R1 and Vmax 22-052
ISR Radial Mount Front Brake 6 Piston CNC Billet Monobloc Calipers for Yamaha R1 and Vmax 22-052
)
Product Description
ISR Brakes from Sweden are very high quality and rugged systems designed for top racers who demand the best performance and durability from their brake systems. Race proven, all ISR brake systems are CNC machined from aerospace quality billet aluminum and then finished with a clear anodized coating for the ultimate in corrosion protection. The 6 piston CNC machined monobloc calipers from ISR have the highest strength to weight ratio of any aftermarket caliper today. This kit fits the Yamaha R1 and Vmax motorcycles with 130mm spacing, sold per set (RH + LH). Can also be purchased individually.
The 22-052 series of monobloc calipers are intended for high performance applications. Perfect for your sportbike or custom applications the 6 piston axial mount monoblocs from ISR will seriously enhance your braking performance. The larger effective radius of the friction area allows a more even distribution of the braking heat and minimizes rotor warpage. The lightweight design lowers unsprung weight while still maintaining high rigidity delivering and exceptional feel with unmatched braking performance. The six individual pads allow more edges to bite into the disc resulting in an extremely high friction characteristics. Each pad has it's own machined pocket that allows for pad retention in the event of pad pin failure, a feature designed as a direct result of Swedish Superbike racing involvement.
The caliper pistons are machined from an aluminum alloy for light weight and are then plated with a very hard Tufram coating designed to minimize wear from long piston life under the most demanding conditions. The 22-052 monobloc series have the following specifications for Yamaha motorcycles with 130mm spacing:
Calipers are sold as a set (RH+LH), individual calipers are also available upon request. As always please check the dimensions and measure carefully, verify the calipers will fit before purchasing. The critical dimensions are listed below, please inquire if you are unsure.
The 22-052 series of monobloc calipers are intended for high performance applications. Perfect for your sportbike or custom applications the 6 piston axial mount monoblocs from ISR will seriously enhance your braking performance. The larger effective radius of the friction area allows a more even distribution of the braking heat and minimizes rotor warpage. The lightweight design lowers unsprung weight while still maintaining high rigidity delivering and exceptional feel with unmatched braking performance. The six individual pads allow more edges to bite into the disc resulting in an extremely high friction characteristics. Each pad has it's own machined pocket that allows for pad retention in the event of pad pin failure, a feature designed as a direct result of Swedish Superbike racing involvement.
The caliper pistons are machined from an aluminum alloy for light weight and are then plated with a very hard Tufram coating designed to minimize wear from long piston life under the most demanding conditions. The 22-052 monobloc series have the following specifications for Yamaha motorcycles with 130mm spacing:
- 30mm x6 pistons
- Pistons are made from a Tufram plated aluminum alloy
- Pad area is 31.8 square centimeters
- Uses EBC FA175 pads or equivalent
- Swept height of rotor is 33mm
- 320mm rotor size
- Rotor thicknesses 4.6mm-5mm
- Banjo bolt size M10 x 1.25mm
- 130mm mounting centers
- .83kg (1.83lb) weight
- Clear anodized
Calipers are sold as a set (RH+LH), individual calipers are also available upon request. As always please check the dimensions and measure carefully, verify the calipers will fit before purchasing. The critical dimensions are listed below, please inquire if you are unsure.
PDF Downloads
