Loading... Please wait... 
Categories
Categories
Brands
Brands
Kawasaki KLR650 Lowering Links From Performance Design
$79.99
)
Product Description
These lowering links from Performance Design offer a very high quality solution to a tall seat height for your Kawasaki KLR650 motorcycle. The links are CNC machined from aircraft quality billet aluminum and are solidly engineered. Anodized red and coated with a quality clear they look good after years of use without corrosion. They are a direct bolt-on replacement and include the bearing bushings and seals already in place. Two versions available, one for the 1987-2007 models and one version for the 2008-current models. Be sure to select your model above before adding to your cart.
The links will lower the bike anywhere from 1.5" (38mm) to 1.75" (45mm) depending upon how the spring pre-load is set. This height reduction will need to be complimented with a corresponding reduction of height in the front end, typically by raising the forks tubes upwards in the triple clamps. The lowering will not limit rear wheel travel like other links do and this greatly improves handling with a lower ride height.
The Performance Design lowering links come with bushing style bearings installed along with the seals. The bushings are very highly precision machined producing a highly precise finish. The solid bushing style bearing allows greater loads by distributing the forces over a more solid surface with more area than needle bearings offer. The high tolerances mean no slop in the movement resulting in more precise suspension motion. Solid bushing style bearing also afford greater resistance to contamination such as water, sand, and dirt. Zirk fittings are installed and allow easy continuous lubrication resulting in many years of trouble free performance.
High quality seals are installed and keep dirt and water out. Made from quality rubber the seals remain compliant in all types of weather and even in colder temperatures. This ensures a tight seal keeping the enemy out! The Performance Design lowering links offer ALL of the following benefits:
The links will lower the bike anywhere from 1.5" (38mm) to 1.75" (45mm) depending upon how the spring pre-load is set. This height reduction will need to be complimented with a corresponding reduction of height in the front end, typically by raising the forks tubes upwards in the triple clamps. The lowering will not limit rear wheel travel like other links do and this greatly improves handling with a lower ride height.
The Performance Design lowering links come with bushing style bearings installed along with the seals. The bushings are very highly precision machined producing a highly precise finish. The solid bushing style bearing allows greater loads by distributing the forces over a more solid surface with more area than needle bearings offer. The high tolerances mean no slop in the movement resulting in more precise suspension motion. Solid bushing style bearing also afford greater resistance to contamination such as water, sand, and dirt. Zirk fittings are installed and allow easy continuous lubrication resulting in many years of trouble free performance.
High quality seals are installed and keep dirt and water out. Made from quality rubber the seals remain compliant in all types of weather and even in colder temperatures. This ensures a tight seal keeping the enemy out! The Performance Design lowering links offer ALL of the following benefits:
- CNC machined from high quality aircraft aluminum for enduring strength
- Precision honed high tolerance bushings for tight suspension movement
- High quality rubber seals pre-installed to keep the grime out
- Clear coating for superior corrosion resistance
- Does not alter travel, full suspension travel remains
- Easy bolt-on installation with nothing more to buy
- Installation instructions
