Loading... Please wait... 
Categories
Categories
Brands
Brands
Performance Friction High Performance DOT4 Racing Brake Fluid
Performance Friction High Performance DOT4 Racing Brake Fluid
)
Product Description
RH665 has the highest guaranteed minimum Dry Boiling Point (ERBP) of any DOT 4 brake fluid on the market today, 325C. This helps to guard against vapor lock and gives a very firm lever feel even under extreme racing conditions. Many manufacturers' boiling points quote "Typical boiling values", but this is not the minimum specification that you could receive because it can be the result of a test on only a single sample. Typical values for RH665 performance brake fluids are invariably higher than 325C. A similar situation applies to Wet Boiling Point, RH665 is guaranteed to be above 195C "typical" values, the average values are much higher and at least the equal of other leading brands. Boiling point is of course not the whole story, with brake fluid it is essential to have the correct balance of properties to get a good overall result. Low viscosity is very important to ensure a good bleed, low compressibility is essential for a firm lever, and lubricity is vitally important for efficiency, lever return, and long life of the brake system. Please Note: many racing brake fluids do not meet the viscosity requirements of DOT 4 specifications.
RH665 Racing Brake Fluid conforms to and exceeds all aspects of the U.S. FMVSS 116 DOT 4 specification. This means that it is has been tested and is compatible with all the rubber materials (SBR, EPDM, etc) and metals commonly used in brake systems and will not damage them. It also means that RH665 performance racing brake fluid is entirely street legal. Many Racing Brake Fluids on the market do not conform to FMVSS specifications and therefore cannot be guaranteed to avoid damage to your brake system. RH665 can be safely mixed with other DOT 4 Brake Fluids however this will degrade its exceptional properties.
Please Note: RH665 is not suitable for use in contact with Magnesium components or in mineral oil based systems. For best results bleed the system with fresh fluid before each event, when the brakes have been excessively hot, and/or the environmental conditions are especially humid. Always follow the vehicle manufacturers recommendations.
RH665 Racing Brake Fluid conforms to and exceeds all aspects of the U.S. FMVSS 116 DOT 4 specification. This means that it is has been tested and is compatible with all the rubber materials (SBR, EPDM, etc) and metals commonly used in brake systems and will not damage them. It also means that RH665 performance racing brake fluid is entirely street legal. Many Racing Brake Fluids on the market do not conform to FMVSS specifications and therefore cannot be guaranteed to avoid damage to your brake system. RH665 can be safely mixed with other DOT 4 Brake Fluids however this will degrade its exceptional properties.
Please Note: RH665 is not suitable for use in contact with Magnesium components or in mineral oil based systems. For best results bleed the system with fresh fluid before each event, when the brakes have been excessively hot, and/or the environmental conditions are especially humid. Always follow the vehicle manufacturers recommendations.
