Loading... Please wait... 
Categories
Categories
Brands
Brands
Press Fit Pilot Jet for Honda OEM Keihin Carburetors XL100, XL185, CB550, CB650, CB750, CB900, TRX200
Press Fit Pilot Jet for Honda OEM Keihin Carburetors XL100, XL185, CB550, CB650, CB750, CB900, TRX200
)
Product Description
Keyster replacement components offer an economical solution to non-existent OEM parts. These press fit pilot jets are a direct replacement for the OEM pressed in pilots found on many older Honda models. See detailed description for a list of models.
Please Note: Installing these will require removal of the OEM pressed in jets. Care must be taken not to snap them off in the carburetor body.
These jets are available in various orifice sizes and measure 28 mm in length. The nozzle length below the press seat is 9.5 mm. The jet head length above the press seat is 14.3 mm. The nozzle diameter is 3 mm and the jet head diameter is 5 mm. The press fit seat width is 4.45 mm and 4.55 mm, there are two stepped seats. Some, but not all, of the applications for this pilot jet include:
- 1986-1991 Honda TRX200SX FOURTRAX SX
- 1991-1997 Honda TRX200D FOURTRAX TYPE II
- 1980-1981 Honda CT70
- 1977-1978 Honda XL100
- 1978-1979 Honda CB125S
- 1976-1978 Honda XL125
- 1978-1979 Honda CM185T
- 1977-1978 Honda CB550K
- 1977-1978 Honda CB550F
- 1979-1980 Honda CB650, CB650C
- 1976-1978 Honda CB750A
- 1977-1978 Honda CB750F
- 1977-1978 Honda CB750K
- 1980-1982 Honda CB900C
- XL80, some models
- XL185, some models
